1450 lb Max. Pull Typical Boat Length 34 - 43 Feet
The Lewmar H-series windlasses use the same reliable worm gearbox technology that Lewmar developed for the Concept and V-Series windlass ranges. The integral solenoid pack simplifies wiring and is protected by the durable maincase. These windlasses feature full power up/down functionality right out of the box. Easy, one-piece, above deck installation.
Note that the H2 and H3 Series of windlasses share the same housing. The difference between them is in the power of the series wound motors 700W vs. 1000W.
Suitable for most boats from 34 - 43 ft in length
Dual direction operation gives total control when both retrieving or lowering the anchor
Sealed waterproof unit requires minimum maintenance - even works under water
Aluminium & composite main case for reduced weight
Stainless steel warping drum with unique "wear & abrasion reduction pattern," can be operated independently of the gypsy
Manual Recovery System (LEW#66840045) can be installed as an option
All gypsies are designed for 5/8" 3-strand line
Note that G4, G40, G43, and High Test (HT) chains are equivalent for sizing purposes
3-year warranty
What's in the box Complete with windlass, deck gasket, mounting bolts, guarded rocker switch, breaker, and integral dual-direction solenoid.
Is one of these windlasses a good choice for your boat? You can use the recommended typical boat lengths provided or, for a more rigorous determination, take the total weight of your ground tackle (anchor + rode) and multiply by 4. The maximum pull capability of the windlass should be at least as large as the resulting number.