Dry Layup Adhesive - Bulk
Formulated for Vacuum Resin Infusion Layup Operations
3M Dry Lay-up Adhesive is a sprayable adhesive for holding glass fabrics and roving in place in the mold during the resin infusion process.
It features a visible red color for easy identification of spray quantities, wide spray pattern, and a fast, strong tack level for holding the heaviest fiberglass fabrics.
For the ultimate in ease of use, this bulk container adhesive should be sprayed with your shop air supply, using a 3M HGP Spray Gun which utilizes disposable tips and cup liners for fast, easy cleanup and reduced solvent usage and disposal. See Related Products, below.
This bulk format can also be brushed or rolled.
Synthetic elastomer-based adhesive
Fast tacking
High coverage
Working time from 15 seconds to 15 minutes, depending on conditions
Bulk container product can be sprayed with standard or 3M's HGP spray guns
Do not brush or roll
Clean with 3M Adhesive remover, toluene, or MEK
Available in aerosol form; see Related Products, below
Approx. coverage: 2,180 ft/gallon @ 0.5 gm/ft (dried weight)
Not VOC compliant.
Consult local state air quality regulations.